|
| SD-10, digital spring tester, is a specialized instruments widely used in such industries, push& pull test, the spring extension/compression test, and so on fields for testing push/pull, extension/compression in a allowed capacity. | | - Peak hold
Hold the peak value in test;
- Peak hold and clean automatically
Hold the peak value, keep the value in 1-10 seconds (time is selected); | |
- Auto power off
The gauge will power off in 1-60 minutes ( time is selected), there is not operation;
- Comparative function
Setting the upper limit and lower limit, the pilot lamp and buzzer to choose the eligible value;
- Calculate the average value
Memory 10 data and calculate the average of memory data;
- Three units
lbf, kgf, and Newton units are push-button selectable;
- RS-232 series port digital output
The RS-232 series port output to printer. Inside printer;
The printing data have max value, min value, average value, eligible value and incompetent value.
| | 
| | 사 양 | | | | Model | SD-10 | SD-20 | SD-30 | SD-50 | SD-100 | SD-200 | SD-300 | SD-500 | SD-1000 | SD-2000 | SD-3000 | SD-5000 | | Capacity | 10N | 20N | 30N | 50N | 100N | 200N | 300N | 500N | 1000N | 2000N | 3000N | 5000N | | Load
Graduation eP | 0.001N | 0.002N | 0.01N | 0.01N | 0.02N | 0.05N | 0.1N | 0.1N | 0.2N | 0.5N | 1N | 1N | | Length &
Width & Height | 300 × 220 × 500 | 300 × 220 × 580 | 450× 290 × 800 | | The Max Travel Journey | 70mm | 100mm | 150mm | | The Max FreeTestable Length | 70mm | 100mm | 200mm | | Platen Dia | 34mm | 49mm | 108mm | | Distortion Value eH | 0.01mm | | Power | 20W | | Electric Power | AC 220v-55Hz and a 1.5V silver oxide battery (The battery maintenance 1 year. If the battery is exhausted, the display will flash to indicate to change the battery.) | | Load Interface | Numeral Display | | Working Temperature | 20 ±10℃ | | Deposit Temperature | -27℃∼+70℃ | | Relative Temperature | 15%∼80% RH | | Show Value | ±1% | |
|
|
